The coating method was repeated for that other half in the stent. Polymer

View previous topic View next topic Go down

The coating method was repeated for that other half in the stent. Polymer

Post  jy9202 on Thu Mar 03, 2016 4:22 am

The coating method was repeated for that other half in the stent. Polymer [You must be registered and logged in to see this link.] films have been also fabricated a equivalent method, as well as the rotating mandrel was spray coated with the polymer utilizing identical parameters stated over. A vertical incision was created length wise over the coated mandrel, and the polymer movies have been very carefully peeled off. Covalent bonding of anti CD34 antibodies onto POSS PCU The protocol for covalent bonding of peptide motifs on POSS PCU was previously designed by de Mel in our lab, and in depth discussion may be observed elsewhere. Briefly, 0. 008 g of N N ethylcarbodiimide hydrochloride, 0. 0115 g of N hydroxysuccinimide, and 0. 05 g of succinic acid had been placed within a 50 ml conical tube. To this, twenty ml of phosphate buffered alternative was extra.

The combine ture was placed on the roller mixer for 3 hours, to permit activation. Circular cut discs of polymer sheets [You must be registered and logged in to see this link.] had been placed inside a 24 well plate. 500 ul in the above stated EDC NHS PBS mixture was pipetted onto every single polymer sheet within the wells. The very well plate was wrapped in alu minium foil in order to avoid light, and placed on a Luckham R100 Rotatest Shaker for three hrs. 500 ul of PBS, and five ul of mouse anti CD34 concen trate had been pipetted into an eppendorf tube. Equal quantities on the antibody alternative have been pipetted into 24 nicely plates. The effectively plate was wrapped in aluminium foil and positioned on the shaker for thirty minutes. It had been then transferred to a four C fridge and left for 24 hours.

Soon after 24 hrs, the polymer discs have been washed with PBS. POSS PCU coated stents were also covalently bonded to anti CD34 antibodies, applying a comparable protocol as stated above. Fourier transform infrared spectroscopy Chemical groups have been detected using ATR FTIR [You must be registered and logged in to see this link.] by using a Jasco FTIR 4200 spectrometer. Parameters had been set at twenty scans at a 4 cm 1 resolution, which has a wavenumber array of 600 cm one to 4000 cm 1. Scanning probe AFM confocal raman spectroscopy Raman and AFM scanning have been performed utilizing NT MDT NTEGRA Spectra method with an upright Raman microscope plus a universal head. AFM scanning was performed in semi make contact with mode with commercial rounded cantilevers for significant scans, bought from MicroMasch.

Raman scanning was done in backscattering geometry which has a Mitutoyo extended doing work distance goal. The excitation supply was a 473 nm solid state Cobolt Blues laser with electrical power at the sample getting 2 mW. Acquisition time per phase was 10s and stage dimension was 0. five microns. Optical photographs from the spot have been captured utilizing the exact same objective. Water get hold of angle A KRÜSS DSA 100 process was applied for static water get in touch with angle measurement, making use of a ses sile drop technique. Sterile deionized water was utilized as being a solvent, with droplet volume of 3 ul. A really hydropho bic materials, Teflon and also a extremely hydro philic materials, Acuvue served as controls. Thromboelastography The impact of polymer material on blood coagulation kinetics was assessed working with a TEG 5000 Thromboelas tograph Hemostasis Analyzer System. Cuvettes have been spray coated with POSS PCU and even more conjugated with anti CD34 antibodies within the protocol outlined above. Uncoated cuvettes served as controls.

jy9202

Posts : 509
Join date : 2013-12-18

View user profile

Back to top Go down

View previous topic View next topic Back to top

- Similar topics

 
Permissions in this forum:
You cannot reply to topics in this forum